Toggle switch w/soldered wires and heatshrink
$2.50
20mm on/off toggle switch with wires pre-soldered with heat shrink on both connectors. Ready to solder to end of harness as you install into position.
20mm on/off toggle switch with wires pre-soldered with heat shrink on both connectors. Ready to solder to end of harness as you install into position.
| Weight | 0.3 oz |
|---|
Only logged in customers who have purchased this product may leave a review.
| Make | Model | Year |
|---|---|---|
| Chrysler | 300C | 2015 - 2024 |
| Dodge | Challenger-All Models | 2015 - 2024 |
| Dodge | Challenger-Hellcat | 2015 - 2024 |
| Dodge | Charger-All Models | 2015 - 2024 |
| Dodge | Charger-Hellcat | 2015 - 2024 |
| Dodge | Durango-All Models | 2014 - 2024 |
| Dodge | Durango-Hellcat | 2021 - 2024 |
| Jeep | Cherokee | 2014 - 2024 |
| Jeep | Compass | 2015 - 2024 |
| Jeep | Gladiator | 2020 - 2024 |
| Jeep | Grand Cherokee-All Models | 2014 - 2024 |
| Jeep | Grand Cherokee-Hellcat | 2018 - 2024 |
| Jeep | Renegade | 2015 - 2024 |
| Jeep | Wrangler-All Models | 2018 - 2024 |
| Ram | 1500-All Models | 2014 - 2024 |
| Ram | 2500-All Models | 2014 - 2024 |
| Ram | 3500-All Models | 2014 - 2024 |
| Ram | TRX | 2021 - 2024 |
Related products
-
Add 4.8mm blade connectors with heatshrink added to harness for easy installation
$3.00Add to cartCrimped and heatshrink added to end of harness.
Image is example of crimp before heatshrink is applied, and then after.
If you are purchasing a 2 switch No Splice Kill Switch Harness and want this option be sure to add quantity 2 to your order.
-
Fake OBD2 connector w/3ft lead
$34.99Add to cartThis harness is identical to OEM that thieves are using to add an additional key FOB to your car with a tablet type device so they can just drive away with your vehicle as your vehicle thinks its a key FOB that is authorized to respond to.
With this fake OBD2 harness, you simply pop out your live OBD2 connector and put this one in it’s place. Route the 3ft cable where you want up under your dash while tucking your live OBD2 connector up out of view and you’re ready to go! When the thief gets into your car to connect into what looks like your OBD2 port nothing is going to work since its NOT connected to your car. More time wasted, and some thieves that just follow a theft script that they use doesn’t work, then they leave!
Connector is pinned to late model CDJR vehicles, so works for all of them!
If you want to use this as a replacement OBD2 port for your messed up one (physically) please send a picture to us via email at: contact@jw2innovations.com and we’ll verify pin locations are identical for you – cause it’s pinned to OEM – and make sure we label all wires and don’t tape it all the way to the end so that you can quickly solder your wires from your original one so this becomes your new live OBD2 connector.
Reviews
There are no reviews yet.